DevinM
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by DevinM
-
-
Ok so here is the situation. I haven't purchased the License yet to this service because I wanted to make sure that it would work, so I took an old computer i7 2nd gen, 12 gb ram, stock intel board. I installed Server 2012R2 (ill refer to this as host from now on) and then installed the Hyper-V role and created another windows server 2012r2 (SmartDeploySrv) image and I also made my reference machines on the host. It has all worked super smooth until now. I was able to make the reference machine and capture their image and download the ppk for the machine and I even configured it with WDS and can PXE boot to the WIN PE.
Now I have tried to add the network share booting from the flash drive and also PXE boot. Both times I had a valid IP address in the corner and when I go to add the share I get Error 67. I have the right credentials. I am not in a domain so the creds are local credentials for the SmartDeploySrv. I got it to work with the offline installer and that is fine but I don't want to have to create a new flash drive every time i want to image a different machine, so I know it is not an issue with the machine.
Any Ideas or suggestions would be appreciated.
-
I also am receiving the error 67 when I try to add a network share. I am booting pxe so I obviously am not having an issue connecting to the network because it boots the Win PE just fine. I have also tried this with the thumb drive boot media and had the same result. Any ideas or suggestions would be very helpful.
Network Share Add Error 67
in SmartDeploy Enterprise
Posted
Hey
Thank you for your quick response however, I have tried with hostname and with IP and both ways I get the same error. I know they are both on the same subnet and I have tried pinging. I am able to ping the deploy machine from the PE but the SmartdeploySrv cannot ping the image target. I thought might be a firewall issue, so i disabled the windows firewall, same result.