Jump to content
DeployCentral

tim.cummings@juhsd.net

Members
 View Profile  See their activity

  • Posts

    46

  • Joined

  • Last visited

 Content Type 

Everything posted by tim.cummings@juhsd.net

  1. tim.cummings@juhsd.net
    I did, I was emailing with you.
  2. tim.cummings@juhsd.net
    yes, also when i create new deployment packs i cannot see them or deploy.
  3. tim.cummings@juhsd.net
    After installing V3, all the computers in computer management disappeared after a reboot.
  4. tim.cummings@juhsd.net
    Okay thanks for the update to pack, We were just told by Dell to run the Dell Command utility to fix ongoing issues with the 7410's, so that was the thought behind that.
  5. tim.cummings@juhsd.net
    Hello, We recently purchased around 270 dell latitudes 7410 and 7400s. We have noticed that dell is pushing a lot of updates and fixes to resolve some of the issues with these. Is it possible going foward to include the dell command update app inside the platform packs for dell. I have noticed that the lenovo packs have the system update app. It would be verfy helpful to a lot of people, I have manually added it to a few dell packs. Just a thought for dell platform packs.
  6. tim.cummings@juhsd.net
    Has anyone tried to make a admin pack for Creative Cloud and/ or CS6, just curious. It is such a large program, not sure how practical it is.
  7. tim.cummings@juhsd.net
    i am having problems with applications installing after image deployment.
  8. tim.cummings@juhsd.net
    will there be a repository created?
  9. tim.cummings@juhsd.net
    I am having an issue with this same mode, the image will not process sysprep properly on these machines. Should secure boot be off? Do you have a bios setting matrix for this model?
  10. tim.cummings@juhsd.net
    It turned out to be a windows update that broke WDS, after a lot of hair pulling and some research, we are back up and working again, it was just a coin incidence that it happens right when we tried a new type of computer we never imaged before. https://social.technet.microsoft.com/Forums/en-US/46e30b31-590e-47b4-b123-faf3776cfe74/windows-update-kb4489882-broke-wds-and-mdt?forum=mdt
  11. tim.cummings@juhsd.net
    We just bought about 400ish new Lenovo ThinkCentre m720q computers, we cannot seem to boot into smartdeploy using PXE, it seems to freeze up at 5%, does anyone have expericne with lenovo thinkcentre's having this issues, also if someone has a matrix for bios settings.
  12. tim.cummings@juhsd.net
    Still says local, not on same domain, not same internet, not on vpn
  13. tim.cummings@juhsd.net
    It was in the console as a local connection type. I was not on prem, device is at a different location.
  14. tim.cummings@juhsd.net
    I was able to get it to work with boot media, but I could not deploy with the agent, i could not get the computer to show up as a "cloud" device.
  15. tim.cummings@juhsd.net
    I am a little fuzzy on how your supposed to be able to deploy over the cloud, say at a employees computer at home? How is that achieved without physically touching the machine?
  16. tim.cummings@juhsd.net
    Sever is 2016 in a VCenter, I think it may be firmware issue, hard to tell.
  17. tim.cummings@juhsd.net
    Hello, I just recently deployed 60 Dell Latitude 3050's with my technicians. We had some issues when leaving the computers set in UEFI mode. The PXE starts but hangs and moves really really slow loading the boot file. I left several booting went to lunch and came back and still didn't boot into smartdeploy boot file. After some word eating on my part, as my technicians recommend legacy mode instead, i insisted it wasn't necessary. But low and behold that worked flawlessly, after disabling secure boot and disabling UEFI boot options, legacy PXE worked fine. I did some quick research and I think it could be a driver issue with the PXE in winpe mode, some other people reporting having issues with WDS, but didn't really find any solution. So just fyi, as we have discovered, from model to model, UEFI seems to not work, and on some legacy doesn't work. I don't believe this anything to do with smartdeploy, but more WDS itself and manufacture drivers, not sure if anyone else has these issues as well. Perhaps experimenting with changing the driver in WINPE of the platform pack. I realize it could also be something simple as a bios update.
  18. tim.cummings@juhsd.net
    Thanks for your help, with the one test machine I had it looks like not having "secure boot" enabled was causing the issue. Not sure if it was enable or disable from dell.
  19. tim.cummings@juhsd.net
    Okay, I am checking now to see if this helps. I had some techs working on this for way too long and i found they changed a lot of settings all wonky in the bios.
  20. tim.cummings@juhsd.net
    I got Sorry, there is a problem The page you are trying to access is not available for your account. Error code: 2C171/1 when clicking that link
  21. tim.cummings@juhsd.net
    They were not in UEFI mode from the factory. I ended up factory reseting them and loading the recovery media, then install the smartdeploy agent, and deploy a package and that worked. But I will have to test further, the image was created in a vm, so uefi or legacy shouldnt matter.
  22. tim.cummings@juhsd.net
    I was able to load the the OS from factory with t he DELL recovery usb, so not sure what the issue is here.
  23. tim.cummings@juhsd.net
    after it looks like the image loads, the computer reboots and has no bootable device other then network nic. We were using pxe by the way not a usb boot disk.
  24. tim.cummings@juhsd.net
    logs https://1drv.ms/u/s!AhwoICTP_02ug_URVLAl9mIbqXaZYg
  25. tim.cummings@juhsd.net
    Yes it is 2.0.3000.8154, i will try to grab logs
×
×
  • Create New...